AMI UKX13+HS2313 Ball Insert Bearings

Bearing number:GE15ES; D:26 mm; Weight:0,026 Kg; B:12 mm; Basic dynamic load rating (C):16 kN; r1 min.:0,3 mm; Angle:8 °; d:15 mm; Bore Diameter (mm):15; Brand:LS;

d:46,038 mm; Width (mm):25,4; T:25,4 mm; Brand:ISO; D:85 mm; C:20,638 mm; a:6,4 mm; Size (mm):46.038x85x25.4; Bore Diameter (mm):46,038; Bearing number:2984/2924;

Bore Diameter (mm):40; d:40 mm; Size (mm):40x74x40; D:74 mm; Brand:NSK; Outer Diameter (mm):74; Weight:0,66 Kg; B:40 mm; Width (mm):40; C:40 mm;

d:22,000 mm; Bearing number:SC04B66LLU; Bore Diameter (mm):22,000; Width (mm):17,000; D:56,000 mm; Outer Diameter (mm):56,000; B:17,000 mm; Brand:NTN; Size (mm):22x56x17; C:17,000 mm;

Outer Diameter (mm):115; Brand:SKF; r2 min.:1,1 mm; Fatigue load limit Pu:2.6 kN; r4 min.:0,6 mm; Bore Diameter (mm):75; D1:105.2 mm; r1,2 min.:1.1 mm; D:115 mm; ra max.:1 mm;

Angle:8 °; l7 min.:20 mm; d2:40 mm; d:15 mm; h:63 mm; r1 min.:0,3 mm; d1:18,4 mm; Bore Diameter (mm):15; Weight:0,14 Kg; Outer Diameter (mm):26;

Cover Diameter A:5.65 in; Type:Open; Number of Bolts:4; Cover Length C1:1.2 in; Cover Length C1:1.3 in; B:5.224 in;

Spherical Diameter (dk or Dk):16.000; Dynamic Load Rating (Cr):8,100; Inner Width (Bi):11.0000; Max. shaft corner radius, or 45 deg. chamfer (ch1):0.300; Max. housing corner radius, or 45 deg. chamfer (ch):0.300; Outer Dia (D):19.0000; Static Load Rating (Cor):40,000; Mis-alignment Angle (a deg.):21

C0:27.9; Width (mm):13,495; KBRG:3161; r min.:1,3 mm; DA1:6.2; DA_:5.879; B_:14.26; outer rb:1; Prod_Type3:TRBSR_ID_A; Basic static load rating (C0):27,9 kN;

Attainable speed for grease lubrication:28000 r/min; Brand:SKF; Fatigue load limit Pu:0.325 kN; Calculation factor - X2:0.41; Preload class A GA:90 N; Static axial stiffness, preload class D:176 N/µm; Preload class C:133 N/micron; Calculation factor - f2C:1.05; d1:37.7 mm; Calculation factor -

C1 - Dynamic Radial Rating (1 million revolutions)6:46600 lbf; B - Cone Width:1.6250 in; a - Effective Center Location4:-0.55 in; Cg - Geometry Factor:0.0694; Cage Type:Stamped Steel; G1 - Heat Generation Factor (Roller-Raceway):75.9; Series:615; Design Units:Imperial; d:1.5625 in; G2 - Heat Generat

D:72 mm; Outer Diameter (mm):72; Bore Diameter (mm):39; Brand:NSK; Bearing number:39BWD09A1CA75; Weight:0,6 Kg; B:37 mm; Width (mm):37; C:37 mm; d:39 mm;

Size (mm):4x8x3; Weight:0,00056 Kg; Brand:NSK; B:3 mm; d:4 mm; Bore Diameter (mm):4; D:8 mm; db max.:5 mm; rb max.:0,1 mm; Basic dynamic load rating (C):0,395 kN;

Weight:0,0114 Kg; Basic dynamic load rating (C):11,1 kN; Outer Diameter (mm):30; Ew:30 mm; Bearing number:K 26x30x13; Basic static load rating (C0):18,7 kN; Bore Diameter (mm):26; Brand:NBS; Fw:26 mm; Bc:13 mm;

Bearing number:6815; Brand:Ruville; Designation SNR:R168.15; Designation SKF:VKBA 1310; Compatibility:NISSAN / MICRA / en; Designation FAG:713613280; Designation SX:CX181;