- Address5600 Corporate Way Richmond, Kentucky 450987, U.S.A.
- Phone(Working Time)753-298-7898
Pillow Block Ball Bearing Units
Contact NowPillow blocks can refer to a variety of bearing styles such as single row ball bearings, double row ball bearings, spherical roller bearings, taper roller bearings, etc. A unit is typically a reference for a 1-piece housing as opposed to a split housing. For simplicity, this article will focus on single row ball bearing units.
Pillow block bearing units are designed for quick, easy and safe mounting. They are sealed and pre-greased at the factory making them ready-to-use. Multiple sealing solutions and greases (including food grade greases) are available for specific application requirements. Some variants may be virtually maintenance-free depending on the application operating conditions. Because of the sphered outer ring interface, they can accommodate moderate initial misalignment, but normally do not permit axial displacement. These units offer a simple, cost-effective solution that can provide a number of benefits.
Bearing Number | Bore Dia | Outer DIa | Width | Size |
---|---|---|---|---|
NTN 9#SP217N1 Pillow Block Ball Bearing Units | 56 | 1200 kN | 1700 r/min | 440 |
NTN ZLOE 218/1A Pillow Block Ball Bearing Units | 65.1 mm | 2.5 mm | 52,5 kN | Bearings |
NTN UCUP207 104 D1 Pillow Block Ball Bearing Units | 38,112 mm | 71,016 mm | 71,016 | 18,258 |
NTN CM-SPW2211 Pillow Block Ball Bearing Units | AUDI / 200 / engine | VKBA 962 | 5706 | 713610260 |
NTN CM-UKP208 Pillow Block Ball Bearing Units | 37 mm | 37 | 90 mm | 41,275 |
NTN SAF22526X4.7 Pillow Block Ball Bearing Units | 215,9 | MJ8.1/2 | 76,2 mm | 76,2 |
NTN SAF 513 Pillow Block Ball Bearing Units | 410011610 | 9,45 mm | LuK | 4 mm |
NTN UKP315 D1 Pillow Block Ball Bearing Units | 1,5 mm | 140 | 90 | Enduro |
NTN C UCP205-100D1 Pillow Block Ball Bearing Units | 20,6 mm | 25 mm | 25x52x20.6 | 52 |
NTN CM-UKP308D1 Pillow Block Ball Bearing Units | 31 mm | 110,8 mm | 5 000 r/min | 31 |
NTN UCUP202 010 D1 Pillow Block Ball Bearing Units | 28.7 | 32009X | 20.000 mm | 63.7 mm |
NTN UCP-2.3/16MFG1 Pillow Block Ball Bearing Units | 68,3 | 160 mm | ISO | 68,3 mm |